Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trane Air Duct Cleaning in Highland Park, CA
We provide independent Trane air duct cleaning, duct sealing and air handler cleaning across Highland Park, CA. The one thing that makes our Trane work here different is the housing: most of these homes were built between 1920 and 1950, so a Trane retrofit usually sits on ductwork that was never designed for forced air. We’re an independent Trane service provider, not affiliated with or authorized by the manufacturer. Our technicians have up to 11 years of experience on systems like yours. Call (866) 937-7218 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.

Why Highland Park Residents Choose Us for Trane Service
Trane is a brand we know well, and the reason isn’t a plaque on a wall. It’s that we’ve cleaned and sealed enough Trane air handlers in Highland Park‘s older homes to recognize the pattern: a variable-speed system working hard against ducts that leak at every joint. That pattern shows up again and again in bungalows and Spanish Colonial Revival houses across the neighborhood, and it’s usually a duct problem wearing an equipment disguise.
We come at it as an independent Trane service provider. No manufacturer affiliation, no sales pitch toward a new system. What you get is a technician who can tell a blower fault from a static-pressure fault, a shop that puts quality parts in that actually fit your equipment, and scheduling that respects your day. One flat price per system, agreed before any work starts, and before-and-after photos of your own ducts so you can see what came out. Clean ducts start with the right equipment, and ours is Rotobrush and Nikro rotary and high-powered vacuum gear built for duct work, not a retrofitted shop vac.
We work throughout Highland Park, from York Boulevard to the streets climbing toward the Arroyo Seco corridor, and the approach doesn’t change with the address.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Trane Air Duct Cleaning Problems We Solve in Highland Park
These are the failures we run into most on Trane equipment in this part of Northeast LA, and each one has a local cause behind it.
- Variable-speed blower motors failing early. On Trane XV20i and S9V2 systems, the blower is built to modulate gently, and it can’t if the ducts are restricted. Undersized, crushed or leaky runs in a 1920s-1950s Highland Park house push static pressure up, the motor works harder than it should, and it fails sooner than it needs to. Cleaning and sealing the duct path protects the motor.
- Condensate and moisture in the air handler. June Gloom brings cool, moist mornings that hang over Highland Park before the afternoon dries things out. When return ducts run uninsulated through a crawl space, that moisture shows up as damp duct walls and a musty smell every time the system starts.
- Corroded heat exchangers in older Trane gas furnaces. Dust pulled in from nearby hills and mature street trees settles on the exchanger, airflow drops, and corrosion sets in faster on a starved furnace. Poor airflow and dust are the pair that does the damage.
- Cabinet and coil leaks mistaken for duct leaks. Vibration and age loosen Trane cased coils, and in a home where an original gravity-furnace transition was adapted for a modern air handler, the leak often sits at that seam. A video inspection tells you which it is before anyone touches a screwdriver.
- Decades of debris in crawl-space ducts. Many Highland Park crawl spaces hold original uninsulated runs that have collected dust, debris and, now and then, rodent nests. That calls for containment and negative-pressure cleaning, not a quick pass with a hose.
Trane Service in Highland Park: What Local Conditions Mean for Your Equipment
The local detail that changes the work here is this: a large share of Highland Park’s 1920s-1940s homes still carry the footprint of an original “octopus” gravity furnace, with sprawling uninsulated ductwork in the crawl space. When a Trane air handler was retrofitted onto that legacy ductwork, the ducts were never sized or sealed for forced-air cooling. They were sized for warm air drifting up. The result is a system that loses a good part of its capacity before the air reaches a room. It also means cleaning has to be done with care around old materials. Older crawl spaces can hold asbestos or lead paint in the duct wrap and connections, and a technician who doesn’t slow down there can dislodge fibers that should stay put. We work with containment and Abatement Technologies air filtration equipment on hand for exactly that reason. If your home has a 1930s gravity-furnace transition feeding a modern Trane air handler, tell us when you book. It changes how we set up, and it’s the kind of thing we want to know before we arrive.
Trane Models & Products We Service in Highland Park
We work on Trane equipment of all kinds found in Highland Park homes: split-system air handlers, gas furnaces, cased coils, variable-speed systems and standard single-stage units. The Trane XR14 and XR15 are common service calls for duct cleaning and airflow correction, and the XV20i and S9V2 variable-speed systems get the same cleaning with close attention to static pressure. We also service Trane air handlers paired with retrofitted ductwork in older homes. On parts, we recommend OEM components for critical items like blower motors and control boards, because fit and efficiency matter there. For wear items like filters and belts, quality aftermarket parts are fine. Filters and air quality products from Honeywell and Aprilaire round out the picture when a home needs better filtration on top of clean ducts.
See the difference
Before
After
Before
After
Before
AfterTrane Service Pricing in Highland Park
Pricing depends on the size of the system, how many runs and returns you have, the condition of the crawl space, and whether sealing or air handler cleaning is added. Older Highland Park homes often mean tighter clearances and more careful setup, which can shift the total. Here’s a rough picture of what a typical estimate might look like:
| Service | Typical Range |
|---|---|
| Full system duct cleaning | $400 – $900 |
| Duct sealing (per system) | $350 – $800 |
| Air handler cleaning | $200 – $450 |
| Dryer vent cleaning | $120 – $250 |
| Air quality and sanitizing | Quoted per job |
These are typical estimates for the area. The written estimate sets the final price, always one flat price per system agreed before work begins. Your free estimate includes the video inspection and a walkthrough of what we find. Call (866) 937-7218 to book one.
Serving Highland Park, CA – Our Local Coverage Area
We serve Highland Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Highland Park
No. We’re an independent Trane service provider, not affiliated with or authorized by the manufacturer. We specialize in Trane equipment because it sits in so many retrofitted homes in Highland Park, and we service it with quality parts that fit it.
Yes, for critical components like blower motors and control boards. OEM parts keep the system running as designed, and on a variable-speed Trane that matters. Wear items like filters and belts can be quality aftermarket.
Most homes here take a half day to a full day, depending on how many runs you have and how tight the crawl space is. Homes with original gravity-furnace ductwork usually run longer because of setup and containment. We’ll give you a realistic time when we quote.
Split-system air handlers, gas furnaces, cased coils and variable-speed systems, including models like the XR14, XR15, XV20i and S9V2. Duct cleaning, duct sealing and air handler cleaning are our three main services on Trane equipment.
Typically $400 to $900 for a full system, with sealing and air handler cleaning quoted separately. The written estimate sets the final price, so nothing changes once the work starts. Call (866) 937-7218 for an exact quote. Estimates are free.
Service Areas Near Highland Park
We also serve homeowners in Los Feliz, Hollywood, Atwater Village, Silver Lake, Koreatown, Eagle Rock and Glassell Park. If you’re just over the hill or down the road, the same Trane service applies. Reach out and we’ll schedule you.
Book Your Trane Service in Highland Park Today
Call (866) 937-7218 for a free estimate on Trane air duct cleaning, duct sealing or air handler cleaning in Highland Park. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One flat price per system, before-and-after photos, and a written estimate that stands.
Written by the team at Air Duct Cleaning Los Feliz.